Koffiekamer « Terug naar discussie overzicht

3D printing

6.208 Posts, Pagina: « 1 2 3 4 5 6 ... 291 292 293 294 295 296 297 298 299 300 301 ... 307 308 309 310 311 » | Laatste
Flat Tyre
0
wat verder googlen bracht me naar volgende sites

https://www.epa.gov/chemical-research/status-epa-research-and-development-pfas#treatment
waar je verder kan scrollen naar een tabel met Drinking Water Treatment Options


hier vind je ook een link naar een Drinking Water Treatability Database
als je daar zoekt op contaminent PFOS, kan je de treatment processes bekijken
maar ook "Evaluation of technologies for removal of PFAS from drinking water. Will include performance and cost data, as well as models and tools to help communities determine optimal treatment choices."
https://tdb.epa.gov/tdb/contaminant?id=11020

Nogmaals doorklikken naar "other threatment" en daar staat dan plasma bij met hetvolgende
https://tdb.epa.gov/tdb/contaminantprocess?treatmentProcId=2088586280&id=11020&treatmentName=Other%20Treatment&contProcId=2146747896

Date of Last Literature Search: March 2021
Summary:
Other processes that have been evaluated for the treatment of PFASs in groundwater or at environmentally relevant concentrations (e.g., 1 milligram per liter or less) include electrochemical treatment [2630], electrocoagulation [2608], and plasma treatment [2634]. These studies were conducted at the bench scale and did not evaluate the treatment processes for practical use in larger-scale drinking water applications. In one of the groundwaters tested, the electrochemical process [2630] achieved 57 to 89 removal of the PFAS compounds present, which included perfluorobutanoic acid (PFBA), perfluoropentanoic acid (PFPeA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorobutyl sulfonate (PFBS), perfluorohexyl sulfonate (PFHxS), and perfluoroheptyl sulfonate (PFHpS). In the other groundwater, the process removed 45 to 87 percent of PFHpA, PFBS, and PFHxS. Concentrations of PFBA, PFPeA, PFHxA, however, increased due to the transformation of precursors.

Electrocoagulation [2608] achieved 59 to 87 percent removal of PFBS and 68 to 96 percent removal of PFHxS. Plasma treatment [2634] achieved 70 percent removal or destruction of PFHxS.
na de crash
0
PFAS-probleem gaat de komende 10 jaar steeds meer visibiliteit krijgen, het zit werkelijk overal.
mjmj
0
ook een interessant bericht over vow.asa en mogelijk ook interessant voor PYR: methaangas uit afval en biokool als vervanger van steenkool.
www.vowasa.com/blog/vow-asa-aiming-fo...
Sub!et
0
POWERING THE RENEWABLE ENERGY TRANSITION WITH 3D PRINTING: HYDROGEN
HAYLEY EVERETT FEBRUARY 22ND 2022 - 7:59PM

"According to Albert Tarancon of the Catalonia Institute for Energy Research, making hydrogen profitable will be “the turning point for a massive deployment of the hydrogen economy,” aided by the “huge” potential of 3D printing functional materials within the hydrogen energy sector."

3dprintingindustry.com/news/powering-...
Sub!et
0
Een kijk op 2022 door o.a. Andreas Langfeld /Stratasys, Bart Van der Schueren / Materialise, Dr. Jeffrey /3D Systems,......

3dprintingindustry.com/news/2022-tren...
voda
0
ArcelorMittal & Nebrija University 3D Print Motorcycle Chassis

Strategic Research Institute
Published on :
01 Mar, 2022, 5:07 am

A close collaboration between ArcelorMittal R&D organization and Materials & Advanced Manufacturing Research Group MOD3RN at Nebrija University in Spain has resulted in the manufacture of a steel chassis that could revolutionize the world of motorcycles. In general, the most widespread material in the world of motorcycles is aluminum, with some exceptions in steel. Managing to develop a steel chassis capable of equaling or improving the lightness of aluminum and that provides a driving sensation and performance similar to that of this material is one of the milestones achieved by this alliance between ArcelorMittal and Nebrija. In order to make a steel piece lighter than an aluminum or titanium one thanks to 3D printing, Nebrija University researchers designed very innovative geometric shapes that allowed the pieces to be hollow.

The possibility of generating hollow parts was the main unknown in metal 3D printing. Wall thicknesses of between 0.8 and 1 millimeter in the chassis involved addressing several issues within 3D printing including stability of the piece during the printing process as a result of the very low thicknesses, control of porosities and mechanical properties in these thicknesses and orientation of the geometric shape to avoid internal supports. These unknowns were resolved throughout the joint research project thanks to certain properties that steel provides in the printing process and that made it possible for the realization of hollow pieces to become a reality.

Once the stability of the steel with these thicknesses was confirmed and the mechanical properties guaranteed, these boundary conditions were integrated into the intelligent design algorithms so that they were automatically capable of generating a range of innovative geometric shapes that were stable over time, to be printed and whose design respected at all times certain orientations that would avoid the generation of internal supports.

The design of the chassis -whole, hollow and with thicknesses of only 0.8 to 1 millimeter- is the result of geometric innovation and the expert knowledge of the designers involved in the process. It is probably one of the few 3D printed hollow parts that exist so large, with such a demanding application and with such a low weight. This steel chassis weighs approximately 3.8 kilos. Aluminum chassis from top-tier brands do not go below 5 kilos, while other steel chassis can shoot up to 6-7 kg. It seems that the difference is small, but losing grams in this type of pieces is very, very difficult, so talking about several kilos is a huge advance

It should be noted that a new steel alloy has not been developed within the framework of this project. Excellent results are achieved with a widely available standard product in the form of powdered steel for additive manufacturing processes. Therefore, beyond the results of the chassis, the generation of steel parts that can compete for lightness with those of aluminum or titanium can enable a change in this industry, since, combining additive manufacturing with a choice of a grade of suitable steel can be even more competitive in terms of cost. This project opens a door for certain components to be manufactured in steel, thus allowing the return of this material to many applications in this business sector within the world of motorcycling competition.

At its technological innovation center in Asturias, ArcelorMittal carries out research oriented towards the application of cutting-edge digital technologies, such as 3D printing or artificial intelligence, in the steel industry, from production processes to the applications of products. Nebrija University integrates artificial intelligence techniques and generative models -intelligent design or generative design- to develop products that can contribute to generating new success stories within a research and innovation environment, applied in this case to the competition industry in automotive. The automotive area is one of the mainstays of Nebrija University, which integrates the Master's Degree in Racing Vehicle Engineering, the Degree in Automotive Engineering, with the collaboration of Yamaha MS Racing-, the Nebrija Automobile Club and special collaborations such as that of the Astara Team in the 2022 Dakar Rally.
Bijlage:
mjmj
0
Zou de vermindering van de afhankelijkheid van het Russische gas de pyrolyse technologie een flinke duw kunnen geven?

Europe’s second largest gas distributor, GRTgaz of France, and Vow subsidiary ETIA recently marked production start of a demo plant built to confirm that CO2 neutral pyrolysis gas can replace fossil gas in the European gas grid.

www.vowasa.com/blog/vow-asa-aiming-fo...
nobahamas
0
Nee niet echt mjmj, al we binnen vijf jaar honderd van deze installaties in Europa neerzetten ( we hebben niet eens de benodigde biomassa), dat zouden we maximaal 1 procent van ons verbruik aan aardgas binnen Europa kunnen vervangen.
De werkelijke waarde van deze installaties is dat rottende biomassa geen methaan produceert, maar omgezet wordt in een gas dat bij verbranding minimaal bijdraagt aan CO2 uitstoot. Terwijl je bijproduct biochar (houtskool met micro kanaaltjes) wel de bodem verrijkt zodat voor de landbouw geen kunstmest nodig is ( bijna alle kunstmest wordt gewonnen uit aardgas, veel in Rusland geproduceerd)

Biochar: biochar-international.org/biochar/
Biochar, al eeuwen oud: www.permaculturenews.org/2016/11/18/b...
voda
0
Azure Selected for 3D Printed Buildings by Oasis Development

Strategic Research Institute
Published on :
02 Mar, 2022, 5:30 am

Azure Printed Homes, innovators of recycled plastic 3D printing building technology, has been chosen by Oasis Development to create fourteen 3D printed prefabricated homes. Oasis is due to start site work in August 2022, with Azure scheduled to deliver the fourteen home community the following month. Azure, who has also been selling recycled plastic 3D printed backyard studios and accessory dwelling units to homeowners, will be creating the first community of durable homes to have their structures be entirely 3D printed using the same waste material repurposing techniques.

Azure developed its innovative technology with a goal of finding a better way to build that would be vastly better for the environment. Azure’s creative solution minimizes waste by using plastic already intended for landfills or that usually ends up in our oceans or incinerated. By using recycled materials instead of new resources, Azure aims to close the sustainability loop in the 3D home building industry by getting closer to a circular economy’s goal of making optimum use of previously used materials.

Through 3D printing, Azure says they can also build structures 70% faster and with 30% fewer costs than traditional home construction methods. Azure Printed Homes plans to reduce home energy consumption bills to zero through a combination of high levels of building airtightness and the use of low-carbon technologies including heat pumps and solar panels.
Bijlage:
MadMushroom
1
Pyrogenesis job offering: Opérateur Post-traitement - Post-treatment Operator
ca.indeed.com/cmp/Pyrogenesis-Canada-...

- Ability to work 12-hour shifts, rotating night and day over two weeks or weekends
- Ability to move loads of 25 kg
"We know that each tower can produce powder at a rate up to 25kg/hour. On a 24/7 basis, it means 4200kg/week or 219,000kg/year.
Titanium nanopowder price for 3D printing is around US$215-US$550/kg.
Maximum possible annual revenues per tower : US$47M-US$120M"

Credits naar vestmed op stockhouse
Sub!et
0
March 9, 2022

MONTREAL, Canada, March 09th, 2022 — HPQ Silicon Resources Inc. (“HPQ” or the “Company”) (TSX-V: HPQ) (FWB: UGE) (OTCQX :HPQFF), an innovative silicon solutions and technology development company, is pleased to inform shareholders that further to our Nov. 29 2021 release, the United States Patent and Trademark Office issued U.S. Patent No. 11,267,714 entitled “SILICA TO HIGH PURITY SILICON PRODUCTION PROCESS” to HPQ SILICON RESOURCES INC on March 8 2022.

hpqsilicon.com/press-release/patent-f...

Sub!et
0
BEYOND THE DECK: HPQ Silicon deelt zijn PowerPoint-presentatie met investeerders
Meer over update bedrijfspresentatie :

youtu.be/g0_JSrTZpB4

CEO Bernard Tourillon gaat "Beyond the Deck" om aandeelhouders een uitgebreide bedrijfsupdate te geven.

Enkele onderwerpen die ze bespreken:

VALIDATIE DOOR DERDEN VAN TOONAANGEVENDE WERELDWIJDE BEDRIJVEN

Als dat lijkt op wat andere kleine bedrijven de laatste tijd zeggen, onderscheidt $HPQ zich als leider van het peloton dankzij het volgende:

? $HPQ heeft al zijn eerste bestelling ontvangen voor sferisch nanosiliciummateriaal van grote autofabrikant

? $HPQ heeft NDA ondertekend en verzoek ontvangen voor 4N siliciummateriaalmonsters van een wereldwijd toonaangevend bedrijf in hoogwaardige materialen

? $HPQ heeft al ondertekende NDA's ontvangen van minstens 2 batterijspelers

SILICON PRIJZEN SKY ROCKETING

En de timing van $HPQ kon niet beter zijn, aangezien de prijs voor 1 metrische ton silicium eind 2021 $ 10.000 bereikte, vergeleken met slechts $ 2.500 een jaar geleden.

HPQ Silicon werd nog sterker toen het aankondigde dat ze een Amerikaans patent hebben gekregen voor de PUREVAP™-kwartsreductiereactortechnologie

CEO Bernard Tourillon merkte op:

“ Sinds 2015 loopt HPQ PUREVAP TM QRR voorop bij het ontwrichten van de productie van silicium, een industrie die nog steeds afhankelijk is van een traditioneel proces om silicium voor het eerst te ontwikkelen in 1899. het einde van de start van het eerste kwartaal van de GEN3 PUREVAP TM QRR-proeffabriek, hebben op een geschikt moment hun hoogtepunt bereikt, aangezien de vraag naar hoogzuiver silicium uit de batterij en hoogwaardige materiaalbedrijven blijft stijgen, net zoals we hadden voorzien dat ze zich nu voordoen in de toeleveringsketen van silicium. Nu ESG-principes een actieve rol spelen bij de inkoop van materialen, is de wereld zich meer bewust van de moeilijkheden om het ESG-conforme silicium te verkrijgen dat nodig is om zijn doelstellingen voor hernieuwbare energie te halen. De realiteit van chronische onderinvestering in nieuwe technologieën in combinatie met de offshoring van Siliciumproductiecapaciteit, heeft een enorme kans gecreëerd voor HPQ en zijn PUREVAP TM QRR gepatenteerde proces, aangezien wij het enige bedrijf zijn dat een nieuw proces op de markt brengt voor het maken van Silicium dat is perfect aangepast aan de nieuwe eisen en realiteit van de siliciummarkt.”
nobahamas
0
quote:

Sub!et schreef op 22 maart 2022 17:14:

BEYOND THE DECK: HPQ Silicon deelt zijn PowerPoint-presentatie met investeerders
Meer over update bedrijfspresentatie :

youtu.be/g0_JSrTZpB4

CEO Bernard Tourillon gaat "Beyond the Deck" om aandeelhouders een uitgebreide bedrijfsupdate te geven.

Enkele onderwerpen die ze bespreken:

VALIDATIE DOOR DERDEN VAN TOONAANGEVENDE WERELDWIJDE BEDRIJVEN

Als dat lijkt op wat andere kleine bedrijven de laatste tijd zeggen, onderscheidt $HPQ zich als leider van het peloton dankzij het volgende:

? $HPQ heeft al zijn eerste bestelling ontvangen voor sferisch nanosiliciummateriaal van grote autofabrikant

? $HPQ heeft NDA ondertekend en verzoek ontvangen voor 4N siliciummateriaalmonsters van een wereldwijd toonaangevend bedrijf in hoogwaardige materialen

? $HPQ heeft al ondertekende NDA's ontvangen van minstens 2 batterijspelers

SILICON PRIJZEN SKY ROCKETING

En de timing van $HPQ kon niet beter zijn, aangezien de prijs voor 1 metrische ton silicium eind 2021 $ 10.000 bereikte, vergeleken met slechts $ 2.500 een jaar geleden.

HPQ Silicon werd nog sterker toen het aankondigde dat ze een Amerikaans patent hebben gekregen voor de PUREVAP™-kwartsreductiereactortechnologie

CEO Bernard Tourillon merkte op:

“ Sinds 2015 loopt HPQ PUREVAP TM QRR voorop bij het ontwrichten van de productie van silicium, een industrie die nog steeds afhankelijk is van een traditioneel proces om silicium voor het eerst te ontwikkelen in 1899. het einde van de start van het eerste kwartaal van de GEN3 PUREVAP TM QRR-proeffabriek, hebben op een geschikt moment hun hoogtepunt bereikt, aangezien de vraag naar hoogzuiver silicium uit de batterij en hoogwaardige materiaalbedrijven blijft stijgen, net zoals we hadden voorzien dat ze zich nu voordoen in de toeleveringsketen van silicium. Nu ESG-principes een actieve rol spelen bij de inkoop van materialen, is de wereld zich meer bewust van de moeilijkheden om het ESG-conforme silicium te verkrijgen dat nodig is om zijn doelstellingen voor hernieuwbare energie te halen. De realiteit van chronische onderinvestering in nieuwe technologieën in combinatie met de offshoring van Siliciumproductiecapaciteit, heeft een enorme kans gecreëerd voor HPQ en zijn PUREVAP TM QRR gepatenteerde proces, aangezien wij het enige bedrijf zijn dat een nieuw proces op de markt brengt voor het maken van Silicium dat is perfect aangepast aan de nieuwe eisen en realiteit van de siliciummarkt.”
www.iheartradio.ca/am800/news/feds-pr...

www.prnewswire.com/news-releases/a-ne...
nobahamas
0
DurianCS
0
quote:

nobahamas schreef op 24 maart 2022 12:56:

P.s. Sub!er
Bij HPQ Silicon gaat het niet over silicium maar over Silicon ( SI) ofwel silicon metaal
en.m.wikipedia.org/wiki/Silicon
Wat is het verschil, behalve dat silicium verouderd is?
nobahamas
0
Silicium is de delfstof die niet in zuivere vorm gewonnen wordt. Bijvoorbeeld zand bevat ook veel silicium maar heeft toch weinig waarde.
Wanneer gesproken wordt over Silicon metal zoals HPQ Silicon dit wil gaan produceren in micro- of nano deeltjes, dan is de zuiverheid van het Silicium enorm bepalend voor de waarde.
Een zuiverheid van 99,9 procent silicium kent een waarde die honderden malen hoger is dan dezelfde hoeveelheid silicium met een zuiverheid van 5 procent ( de delfstof)

Silicon metal is ook in de Nederlandse taal de term geworden om aan te geven dat er gesproken wordt over de gezuiverde vorm.

nobahamas
0
18 october vorig jaar:
PyroGenesis Announces Receipt of $2.5MM Milestone Payment from Tata Steel

www.globenewswire.com/news-release/20...

Nu in het nieuws dat Tata in Nederland een installatie heeft besteld om de uitstoot te zuiveren.
www.nu.nl/economie/6191364/tata-steel...
FrenkvZ
0
quote:

nobahamas schreef op 25 maart 2022 13:25:

18 october vorig jaar:
PyroGenesis Announces Receipt of $2.5MM Milestone Payment from Tata Steel

www.globenewswire.com/news-release/20...

Nu in het nieuws dat Tata in Nederland een installatie heeft besteld om de uitstoot te zuiveren.
www.nu.nl/economie/6191364/tata-steel...

Er wordt nergens genoemd dat de nieuwe milieuinstallatie afkomstig is van Pyrogenesis.
Het zou voor Pyrogenesis ook een significant bedrag zijn, aangezien er kosten worden genoemd van 200 miljoen, maar ik betwijfel het of ze er betrokken zijn.
6.208 Posts, Pagina: « 1 2 3 4 5 6 ... 291 292 293 294 295 296 297 298 299 300 301 ... 307 308 309 310 311 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Markt vandaag

 AEX
860,30  -5,06  -0,58%  17:32
 Germany40^ 17.737,30 -0,56%
 BEL 20 3.831,36 +0,12%
 Europe50^ 4.918,38 -0,37%
 US30^ 37.924,96 -0,23%
 Nasd100^ 17.243,34 -1,74%
 US500^ 4.995,45 -1,07%
 Japan225^ 37.415,98 -1,54%
 Gold spot 2.392,42 +0,55%
 EUR/USD 1,0664 +0,20%
 WTI 82,14 +0,07%
#/^ Index indications calculated real time, zie disclaimer

Stijgers

WDP +3,12%
Kendrion +2,92%
EBUSCO HOLDING +2,83%
Vopak +2,23%
B&S Group SA +2,11%

Dalers

JUST EAT TAKE... -4,83%
VIVORYON THER... -3,72%
TomTom -3,51%
ASMI -3,45%
BESI -3,39%

EU stocks, real time, by Cboe Europe Ltd.; Other, Euronext & US stocks by NYSE & Cboe BZX Exchange, 15 min. delayed
#/^ Index indications calculated real time, zie disclaimer, streaming powered by: Infront