Arcelor Mittal « Terug naar discussie overzicht

Arcelor Mittal - oktober 2022

166 Posts, Pagina: « 1 2 3 4 5 6 7 8 9 » | Laatste
Bart Meerdink
0
quote:

gerard45 schreef op 12 oktober 2022 06:08:

@Bart Meerdink,

wat ze prive doen? ik ben misschien wat kort door de bocht, en jij met je reactie heb misschien wel gelijk. maar ik vindt er toch een tintje van disrespect naar de aandeelhouder toe inzitten, velen kochten eerste aandelen voor 60 + euro en nu zoals 'wins' al zegt is het 7 euro per aandeel,(er zijn nog wat detail,, geef ik toe) aandelhouder bloedt prive gigantisch, en mittal koopt prive doodleuk een mega jacht, vliegtuig? noem maar op,, dat is toch ongemakkelijk

onvoorziene toestanden, dit bedrijf heeft wel een beetje veel onvoorziene toestanden gehad, alleen maar eigenlijk, als dat zo is dan ga je het beleid daar toch eerder op aanpassen, ik ben alweer benieuwd wat voor lijken er komende kwartaal cijfers nu weer uit de kast gaan komen
Volgens mij doelde wins op de 1:3 reverse split van mei 2017.

De aandelen zijn in 2020 uitgegeven op $9,27/€8,57 (voor $750 mln). Verder nog een $1250 mln mandatory convertible 5,5%

Zie corporate.arcelormittal.com/investors...

De $1250 mln 5,5% convertible wordt in aandelen omgezet (volgend jaar) op een koers van $10.64050 per aandeel als ik het wel heb.
03har
0
India’s corporate affairs ministry approves demerger of NMDC’s steel mill project
Wednesday, 12 October 2022 11:11:10 (GMT+3) | Kolkata

India’s Ministry of Corporate Affairs (MCA) has approved the demerger of state-run NMDC Limited’s 3 million mt per year capacity greenfield steel mill project, directing it to start the demerger process immediately, a statement issued by NMDC Limited said on Wednesday, October 12.

The demerger of the steel mill project from parent NMDC Limited is a precursor to it being put up for its privatization to private investors through competitive bidding.

As per the timelines set by the government, the demerger process needs to be completed by NMDC Limited by the end of October, enabling the government to start inviting formal bids from private investors by December.

Industry speculations indicate that domestic steel majors like JSW Steel Limited and Jindal Steel and Power Limited (JSPL), along with global majors like ArcelorMittal and POSCO are preparing to submit bids for the steel mill project about to start trial production over the next few months in the central state of Chhattisgarh.
lefreaks
0
quote:

Gotcha70 schreef op 12 oktober 2022 16:07:

eentje om terug te lezen.

[...]

Onze topinvesteerder UpandDown.

Gak van € 16,97 van JET. Het aandeel nadert de € 12. Logisch dat we hem niet meer horen.
Heel stoer om het er nog even in te wrijven nadat alle koersen fors gedaald zijn.
Kom je hier ook terug om hem te feliciteren als zijn koers € 30,- is geworden?
Gotcha70
0
quote:

lefreaks schreef op 12 oktober 2022 20:24:

[...]
Heel stoer om het er nog even in te wrijven nadat alle koersen fors gedaald zijn.
Kom je hier ook terug om hem te feliciteren als zijn koers € 30,- is geworden?
JET ooit nog € 30? Dat wil ik nog wel eens zien.

AM zail ooit wel terug in die richting gaan, de vraag is in welk jaar. En kan handig zijn om eens winst te nemen om daarna terug te kopen aan een lagere prijs. Zo heb je echte winst en geen virtuele winst.

En dat de koersen gingen zakken was toch te verwachten. Ik snap zelfs niet waarom die waren gestegen in de zomer. Omdat de resultaten goed waren? Resultaten zijn feiten uit het verleden, een belegger moet rekening houden met de toekomst.

lefreaks
1
quote:

Gotcha70 schreef op 12 oktober 2022 21:31:

[...]

JET ooit nog € 30? Dat wil ik nog wel eens zien.

AM zail ooit wel terug in die richting gaan, de vraag is in welk jaar. En kan handig zijn om eens winst te nemen om daarna terug te kopen aan een lagere prijs. Zo heb je echte winst en geen virtuele winst.

En dat de koersen gingen zakken was toch te verwachten. Ik snap zelfs niet waarom die waren gestegen in de zomer. Omdat de resultaten goed waren? Resultaten zijn feiten uit het verleden, een belegger moet rekening houden met de toekomst.

Wat betreft de toekomst: "Kom je hier ook terug om hem te feliciteren als zijn koers € 30,- is geworden?"
voda
0
Beursupdate: AEX op Wall Street

Door ABM Financial News op woensdag 12 oktober 2022
Views: 5.109

(ABM FN-Dow Jones) Op Wall Street zijn woensdag alle acht AEX-genoteerde fondsen ten opzichte van het slot in Amsterdam lager gesloten. ASML was met een verlies van 0,8 procent de sterkste daler. Unilever, Shell en Philips wisten de [fractionele] verliezen het meest te beperken met een vlak slot.

Aegon (-0,1%)
ArcelorMittal (-0,1%)
ASML (-0,8%)
ING Groep (-0,5%)
Philips (0,0%)
RELX (-0,2%)
Royal Dutch Shell (0,0%)
Unilever (0,0%)

Euro/dollar: 0,9699

Op basis van de bovenstaande koersuitslagen zou de AEX index, die sloot op 631,18 punten, zijn geëindigd op 630,51 punten.

Bron: ABM Financial News
voda
0
ArcelorMittal Kryvyi Rih to Limit Use of Electricity

The Ukrainian government has appealed to businesses and citizens of the country to limit energy consumption in connection with a massive Russian missile attack on energy infrastructure facilities. As a result, ArcelorMittal Kryvyi Rih in Dnipropetrovsk region has decided to limit electricity consumption by the most energy-intensive equipment and temporarily reduce current production. ArcelorMittal Kryvyi Rih said “This is important to reduce electricity consumption in Krivoy Rog and the safety of personnel, which is our key priority.”

ArcelorMittal Kryvyi Rih added that “The shipment of products to customers is carried out as planned and it hopes to return to the regular work schedule of production equipment after the stabilization of energy supply in the country.”

ArcelorMittal Kryvyi Rih is the largest producer of rolled steel in Ukraine. It specializes in the production of long products, in particular rebar and wire rod.
Bijlage:
voda
0
Worldsteel Announces 3th Steelie Awards Shortlist

The World Steel Association has announced the shortlist for the 13th Steelie Awards, which recognises member companies for their contribution to the steel industry over a one-year period in a series of categories impacting the industry. The winners will be revealed on 17 October. The Steelies are awarded in six categories

1. Excellence in low-carbon steel production
Ansteel Group - Low CO2 emission blast furnace charge solution based on low basicity high silicon pellets and its application
Ansteel Group - The R&D of digitisation and networking energy management system at the Bayuquan site
ArcelorMittal - CO2 reduction by means of coke oven gas co-injection in blast furnace
JSW Steel - Project SEED (Sustainable Energy Environment and Decarbonisation)
Tenaris - Smart furnace for scrap use optimisation based on mathematical models and data science
Ternium - Carbon capture and utilization in Ternium Mexico

2. Innovation of the year
Big River Steel - Development of single phase nano-precipitation strengthened batch-annealed SP590 sheet steel with outstanding formability: a low-cost, greener DP590 alternative
HYUNDAI Steel - Development of materials for electric vehicle reducer
HYUNDAI Steel - Development of 1.5 GPa hot stamping steel in conjunction with high toughness performance
JFE Steel - Novel arc welding process for heavy-thickness steel plates with ultra-narrow groove weld joints
POSCO - STS high-speed extended width AC electrolytic pickling technology

3. Excellence in sustainability
Bangladesh Steel Re-Rolling Mills - An innovative project for utilising 100% induction furnace slag to replace unsustainable fired clay bricks and stone chips in Bangladesh
Gerdau - BIOCOKE
JFE Steel - Refractories for hot metal transport vessels contributing to a sustainable society
JSW Steel - Development of construction sand from waste steel slag
POSCO - Recycling shell waste for sustainable steelmaking

4. Excellence in Life Cycle Assessment
ArcelorMittal - Carbon footprint of cold stamping and hot stamping components
HBIS Group - Using LCA to promote the carbon emission reduction in the whole value chain of hydrogen-based DRI projects
JSW Steel - Developing and implementing an Environment Product Declaration programme and promoting it in market communications
Nippon Steel - EPD development for steel products
Tata Steel – PACI, a tool to support innovation and customer engagement through life cycle thinking in the steel value chain
Tata Steel - Using LCA to identify environmental hotspots to drive decarbonisation

5. Excellence in education and training
Emirates Steel Arkan - Career Aspirations Programme
HBIS Group - High Skilled Talents Training Centre
JSW Steel - TalenTech
Tata Steel - Capability Building for Agile Transformation UDAAN
Ternium - Competences Certification Programme for Risky Tasks CCRT

6. Excellence in communications programmes
Gerdau - How the century-old Gerdau transformed its image and became the steel company with the highest global engagement
HYUNDAI Steel - Children’s Vocational Experience Center
JSW Steel- ‘Always Around’ campaign
POSCO - Programme designed to bring the steel industry closer to the social media-savvy MZ generation
Tata Steel - Communication on diversity and inclusion
Tenaris - New way of working and new offices
Ternium - Ternium Safety Day
The selection process for the shortlist varies between awards. In most cases the submissions are requested via the appropriate worldsteel committee. Entries are then judged by selected expert panels.
voda
0
Beursblik: winstgevendheid staalbedrijven zwaar onder druk door hoge energiekosten
Maar balansen juist sterker volgens Citi.

(ABM FN-Dow Jones) De winstgevendheid van Europese staalbedrijven heeft in het derde kwartaal stevig onder druk gestaan. Dit verwachten analisten van Citi Research.

Op kwartaalbasis voorziet Citi voor de sector een daling van de EBITDA van ongeveer 50 procent als gevolg van de hoge energiekosten. En in het vierde kwartaal gaat daar nog eens 33 procent van af, denkt de bank. Dan drukken ook de lagere staalprijzen en volumekrimp op de winsten.

In het eerste kwartaal van 2023 zal de druk van lagere prijzen en volumes zijn piek bereiken, verwacht Citi.

Maar ondanks al deze tegenwind, blijven staalaandelen aantrekkelijk geprijsd, vinden de analisten.

"Ondanks deze forse winstdalingen zal de vrijval van werkkapitaal de druk op de balansen van staalaandelen compenseren, waardoor de bedrijven de sterkste balansen sinds begin 2000 zullen laten zien", aldus Citi.

Door: ABM Financial News.

info@abmfn.nl

Redactie: +31(0)20 26 28 999
tempus fugit
0
quote:

Service schreef op 13 oktober 2022 10:46:

Wat moet dit dit bericht ????
Kun je geen touw aan vast knopen
:-)

Trivano.com) - Op 13 oktober 2022 hebben de analisten van Citigroup hun beleggingsadvies voor ArcelorMittal (MT; ISIN: LU1598757687) herhaald. Het advies van Citigroup voor ArcelorMittal blijft "kopen".

Het koersdoel wordt door Citigroup verlaagd van 50,00 EUR naar 43,00 EUR.
MarcoPolo
0
Vraagje: wat is een verklaring voor het stijgen van de koers van AM terwijl de OBV daalt en onder 0 staat? Voor mij klinkt dit niet logisch
lefreaks
1
quote:

MarcoPolo schreef op 13 oktober 2022 11:33:

Vraagje: wat is een verklaring voor het stijgen van de koers van AM terwijl de OBV daalt en onder 0 staat? Voor mij klinkt dit niet logisch
Wanneer de koersgrafiek nog een dalende trend laat zien, maar de OBV begint te stijgen, zal dit een trendomkeer in de koersgrafiek inluiden. Men spreekt dan van een koopsignaal. Omgekeerd: wanneer de koersgrafiek nog een stijgende trend laat zien, maar de OBV begint te dalen, zal dit een verkoopsignaal aangeven.

nl.m.wikipedia.org/wiki/Balans_Volume...

Volgens mij staat de koers al sinds begin juli op ongeveer hetzelfde niveau. De verhandelde volumes zijn wel gedaald van 5 naar 4 miljoen, dus wat mij betreft is het wachten op stijgende volumes ergens midden in een milde winter of anders in het voorjaar van 2023.

Tenzij de bemiddelingspogingen van onze vriend Erdogan al eerder succes hebben... ;-))
christo1
0
quote:

Bart Meerdink schreef op 12 oktober 2022 18:06:

[...]
Volgens mij doelde wins op de 1:3 reverse split van mei 2017.

De aandelen zijn in 2020 uitgegeven op $9,27/€8,57 (voor $750 mln). Verder nog een $1250 mln mandatory convertible 5,5%

Zie corporate.arcelormittal.com/investors...

De $1250 mln 5,5% convertible wordt in aandelen omgezet (volgend jaar) op een koers van $10.64050 per aandeel als ik het wel heb.
Die mandatory covertible bedraagt momenteel geen $1250 mln maar +- $600 mln, scheelt toch een slok op de borrel.
Bart Meerdink
0
quote:

christo1 schreef op 13 oktober 2022 19:01:

[...]

Die mandatory covertible bedraagt momenteel geen $1250 mln maar +- $600 mln, scheelt toch een slok op de borrel.
Ah, ik zie dat ze bezig geweest zijn om daar wat van terug te kopen. Wel op een hogere koers dan nu. Maar de helft van de pijn is dus al geleden. Wat resteert correspondeert met 57 mln aandelen volgens het Q2-rapport. Ofwel toch weer zo'n $1233 mln nodig van het inkoop-programma om dat ongedaan te maken... (bij de huidige koers).
voda
0
Beursupdate: AEX op Wall Street

Door ABM Financial News op donderdag 13 oktober 2022
Views: 6.424

(ABM FN-Dow Jones) Op Wall Street zijn donderdag alle acht AEX-genoteerde fondsen ten opzichte van het slot in Amsterdam hoger gesloten.

Aegon (+2,35%)
ArcelorMittal (+0,64%)
ASML (+0,85%)
ING Groep (+0,50%)
Philips (+1,12%)
RELX (+0,69%)
Royal Dutch Shell (+0,06%)
Unilever (+0,37%)

Euro/dollar: 0,9773

Op basis van de bovenstaande koersuitslagen zou de AEX index, die sloot op 633,01 punten, zijn geëindigd op 635,23 punten.

Bron: ABM Financial News
voda
0
ArcelorMittal Dofasco Breaks Ground on Green Steel Plant in Canada

Leading steel maker ArcelorMittal, in the presence of the governments of Canada and Ontario, has today broken ground on its CAD 1.8 billion investment Decarbonisation project at the ArcelorMittal Dofasco plant in Hamilton in Ontario in Canada. The project, a partnership between ArcelorMittal and the governments of Canada and Ontario, which was first announced in July last year, will play an important role in ensuring the Company makes progress this decade with its Decarbonisation efforts and is part of ArcelorMittal’s target to reduce the carbon intensity of the steel it produces by 25% by 2030. ArcelorMittal CEO Mr Aditya Mittal said “ArcelorMittal’s ambition is to lead the Decarbonisation of the steel industry. This ground-breaking at ArcelorMittal Dofasco is a very significant day for ArcelorMittal’s journey to near zero steel making. It shows what is possible as a result of partnership, trust and understanding. For a hard to abate sector like steel I hope what we have achieved here in Canada can help to accelerate the development of the conditions required for decarbonizing steel globally.”

The project will fundamentally change the way steel is made at ArcelorMittal Dofasco, transitioning the site to direct reduced iron-electric arc furnace steelmaking, which carries a considerably lower carbon footprint and removes coal from the ironmaking process. The new 2.5 million tonne capacity DRI furnace will initially operate on natural gas but will be constructed ‘hydrogen ready’ so it can be transitioned to utilize green hydrogen as a clean energy input as and when a sufficient, cost-effective supply of green hydrogen becomes available.

Since the project was initially announced last year, ArcelorMittal Dofasco has established a dedicated project team to manage its transition, completed significant pre-front end engineering and design work as well as analysis of the equipment needed for its transformation. The Hamilton team has shared updates on the projects progress including news that ENERGIRON, the innovative direct reduction technology jointly developed by Tenova & Danieli, has been chosen as its DRI equipment. It will produce 2.5 million tonnes of DRI per year to be used in Hamilton’s EAFs to produce the most demanding steel grades. The first onsite construction work will begin in January 2023, with the demolition of the decommissioned No.1 Coke Plant to make room for the new DRI plant. Demolition is anticipated to take up to nine months to complete.

Also in 2023, detailed engineering work will be undertaken before foundation work begins in 2024. Construction will become visible from outside the manufacturing campus in 2024 as the structures begin to take shape. Construction on the new assets will be complete in 2026, at which point a 12 to 18-month transition phase will begin with both steelmaking streams (BF-BOF and DRI-EAF) active. The transition will be complete by 2028.

In addition to the new DRI facility, the project also involves the construction of an EAF capable of producing 2.4 million tonnes of high-quality steel through ArcelorMittal Dofasco’s existing casting, rolling and finishing facilities. Modification of ArcelorMittal Dofasco’s existing EAF facility and continuous casters will also be undertaken to align productivity, quality and energy capabilities between all assets in the new footprint.
Bijlage:
voda
0
166 Posts, Pagina: « 1 2 3 4 5 6 7 8 9 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Detail

Vertraagd 24 apr 2024 17:35
Koers 23,640
Verschil 0,000 (0,00%)
Hoog 23,950
Laag 23,550
Volume 2.185.626
Volume gemiddeld 2.461.865
Volume gisteren 2.185.626

EU stocks, real time, by Cboe Europe Ltd.; Other, Euronext & US stocks by NYSE & Cboe BZX Exchange, 15 min. delayed
#/^ Index indications calculated real time, zie disclaimer, streaming powered by: Infront