Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 618 619 620 621 622 623 624 625 626 627 628 ... 1755 1756 1757 1758 1759 » | Laatste
voda
0
Middle East DRI output rebounds in April

Direct reduced iron production in the four Middle Eastern countries covered by worldsteel's monthly report grew 10% on-year in April to 2.58 million tonnes, Kallanish notes. It thus recovered from its -5% on-year slump in March that brought to an end seven consecutive months of on-year increase.

The region’s largest producer, Iran, increased DRI output 10% in April to 1.57mt. This supported a crude steel output rise of 15% that month to 1.74mt. Much of Iran’s output growth has been driven by increased steel exports.

Iranian pig iron output, concentrated at sole blast-furnace based steelmaker Esfahan Steel (Esco), rose 16% in April to 192,000t. Esco said last month it is gearing up to increase pig iron output in order to raise exports of the hot metal (see Kallanish 13 April).

DRI production at Saudi Arabia’s largest producer, Sabic, however, dropped -11% in April to 429,000t when crude steel output rose 6.4% to 454,000t. This suggests Sabic used a greater portion of scrap in its feedstock mix. This would tally with the slump in international scrap prices during the second half of March and in April after they reached a 2017-high in early March.

United Arab Emirates’ DRI output surged 74% in April to 353,000t when crude steel output grew 24.4% to 299,000t. The faster DRI growth suggests Emirates Steel may have sold merchant DRI that month, as well as using less scrap as feedstock.

Qatari DRI output was flat in April at 235,000t when crude steel production slumped -11.8% to 186,000t, suggesting Qatar also sold merchant DRI.
Middle Eastern DRI production thus rose 9% on-year in January-April to 9.27mt.
Egyptian DRI output, meanwhile, surged 65% on-year in April to 308,000t, as Ezz Steel’s latest DRI plant continues to ramp up, supporting Egyptian domestic crude steelmaking with increased local feedstock.

Iran remained the world’s largest DRI producer after the four months with 5.61mt, followed by India with 4.93mt and Mexico with 2.04mt.

Source: Kallanish.com
voda
0
Thailand applies anti-dumping duties to some HRC imports

Thailand’s Department of Foreign Trade has announced antidumping duties on certain hot rolled flat steel products from Brazil, Iran and Turkey. The country has seen demand improve in the last eighteen months and it has also been steadily imposing more trade measures, Kallanish notes.

The duties have been imposed (see table) on carbon steel hot rolled coil and sheet more than 0.9mm thick and up to 3,200mm wide. The department has found injury to domestic producers after an investigation was requested by several local suppliers including Sahaviriya Steel Industries (SSI), G Steel, GJ Steel, Sahaviriya Plate Mill and LPN Plate Mill.

Thailand has recently imposed duties on Vietnamese galvalume and colour-coated sheet and increased duties on Chinese wire rod. A number of steel associations also requested even more trade protections earlier this month, alleging that it is too easy for companies to avoid paying duties on imports.

Source: Kallanish.com
Bijlage:
voda
0
Staalsector bezorgd over emissieplan EU

Gepubliceerd op 29 mei 2017 om 09:29 | Views: 2.681

ArcelorMittal 15:53
19,89 -0,06 (-0,30%)

BRUSSEL (AFN) - De staalindustrie in de Europese Unie is bezorgd over de Europese plannen voor de handel in emissierechten. In een open brief schrijven 76 bestuursvoorzitters uit de Europese staalsector dat die plannen nadelige gevolgen zullen hebben voor de staalindustrie.

De EU wil de handel in emissierechten verminderen om zo bedrijven te stimuleren tot een verlaging van de CO2-uitstoot. Maar de staalsector vreest dat dit kan leiden tot een tekort aan CO2-rechten, met als gevolg hogere kosten. Daardoor kunnen de investeringsmogelijkheden worden beperkt en neemt het risico op verlies van werkgelegenheid en de sluiting van staalfabrieken in de EU toe, aldus de bestuurders.

Het emissieplan moet helpen bij de doelstelling van de EU om de uitstoot van CO2 in 2030 met 40 procent te verminderen vergeleken met 1990. Over de voorstellen wordt nog onderhandeld in Brussel.

Klimaatverandering

De staalsector gaf aan dat klimaatverandering een kritiek probleem is en dat het voorstander is van een vermindering van de CO2-uitstoot in Europa. Maar nu worden technisch onhaalbare eisen gesteld aan de Europese staalsector, terwijl die juist koploper is bij het terugdringen van de uitstoot van broeikasgas en tot de meest innovatieve ter wereld behoort, aldus de briefschrijvers.

De staalbedrijven vrezen dat door de plannen van de EU de wereldwijde concurrentiepositie van de Europese staalsector wordt ondermijnd omdat staalfabrikanten buiten de EU niet met hogere kosten te maken krijgen, terwijl ze wel meer CO2 uitstoten dan hun Europese branchegenoten.

De brief werd ondertekend door onder anderen de directeuren van de Europese divisies van ArcelorMittal en Tata Steel, het hoofd van de staaldivisie van het Duitse ThyssenKrupp en de bestuursvoorzitters van Salzgitter en Aperam. Ook de presidenten van verschillende brancheverenigingen zoals de Europese staalassociatie Eurofer hebben hun handtekeningen gezet.
voda
0
CSC to lower prices by 5pct for Q3

Taipei Times reported that China Steel Corp the nation’s largest and only integrated steelmaker, yesterday said it would lower steel prices by 5.28% on average for shipments in the third quarter in response to fluctuations in global markets. Prior to the cut, the steelmaker had raised prices by 12.6% and 6.9% for deliveries in the first and second quarter respectively to reflect soaring raw material costs.

CSC said in a statement that given decreasing global steel prices, the latest adjustment would ensure that its downstream customers can compete with their peers overseas, as some of them are facing fierce competition from cheap steel plate imports in Taiwan.

Based on the adjustment, CSC is to lower prices of its products by NTD 1,142 (USD 37.91) per tonne for next quarter’s contracts.

Prices for benchmark hot-rolled sheets and coils are to drop by NTD 1,459 per tonne for next quarter’s shipments, those for cold-rolled sheets and coils which are used in the automotive industry are to fall by NTD 1,679 per tonne, and those for hot-dipped, zinc-galvanized sheets are to be cut by NTD 1,896 per tonne.

Going ahead, the company gave a positive business outlook in light of sustained demand for steel products worldwide, despite price swings in steel markets since March.

Price instability was mainly due to oversupply problems and market manipulation in China, company vice president Lee Shin-min said by telephone. He said that “However, the decline in prices was just a short-term phenomenon adding that steel prices are expected to pick up soon.

Source : Taipei Times
voda
0
Thailand finalizes duties on Iranian flat steel

Thailand has set definitive anti-dumping duties on the import of hot-rolled flat steel products such as coil and sheet from Iran. The definitive duties contain minor changes when compared with the preliminary rates. They range from as low as 6.88% to as high as 38.23%, and are in place for a period of five years from May 16, according to a notice published in the Royal Thai Gazette earlier this month. The main product under scrutiny is carbon steel hot-rolled coils and sheets, with a thickness of 0.9 mm to 100 mm and a width of 100 mm to 3,200 mm.

Thai officials’ main focus of anti-dumping duties was products from Iran’s Mobarakeh Steel Company, which will be levied a 7.25% tax, down from 7.37%. The duty for other Iranian mills has been reduced to 38.27% from 38.52%.

They compare with preliminary duties of 7.09-38.52%, which had been imposed on November 16 for an initial four months before being extended for two months until May 15.

Brazil and Turkey were also under scrutiny.

The lowest duty of 6.88% was set for imports from Turkey’s Colakoglu Metalurji, lower than the provisional rate of 7.09%.

Imports from Turkey’s Erdemir and Isdemir will be subjected to a duty of 27.27%, down from 28.34%, while other Turkish suppliers saw their duty lowered to 38.23%, from 38.52%.

The duty for imports from Brazil was unchanged at 34.4%.

The investigation, which was opened in January 2016, drew strong criticism from Turkish market participants early this year.

Source : Financial Tribune
Bijlage:
voda
0
NLMK Group providing guarantee of up to 35 years on its pre painted steel

NLMK Group, an international steelmaking company with operations in Russia, the USA and European Union, has taken steps to improve customer service by introducing guarantees of the decorative and protective properties of polymer coatings which range from 10 to 35 years. The guarantee of the longevity of the polymer coating covers products manufactured at NLMK Lipetsk using polyester, polyurethane and PVDF enamels applied to hot dip galvanized steel.

Mr Ilya Guschin Vice President of Sales of NLMK Group said that “NLMK has the technology to enable it to guarantee the exceptional quality and longevity of its products, something which is particularly important given the climate in Russia. This guarantee of NLMK products provides an additional competitive advantage to our customers, while consumers can be confident in the high quality of our products.”

NLMK markets steel products with a polymer coating over galvanized steel, with a protective zinc coating weight ranging from 140 to 275g/m². These measurements deliver superior operational performance of the steel products, compared to prevailing existing pre-painted steel market offerings with a protective zinc coating weight of 100g/m² and under.

Close monitoring of technological processes enables NLMK to guarantee the longevity of the decorative properties of pre-painted products that do not suffer from peeling, flaking or cracking of the surface layer, as well as from uneven change in colour. NLMK is also able to guarantee the protective properties of the steel, ensuring there is no corrosion.

Depending on the category of the surface coating, be it ‘Standard’, ‘Standard+’, ‘Premium’ or ‘Premium+’; as well as climactic conditions and the application in which the steel is used, the guarantee period for preservation of decorative properties ranges from 10 to 25 years, whilst for protection against corrosion it ranges from 22 to 35 years.

Steel products, with a wide variety of paint coatings from right across the colour spectrum, are used to produce profiled sheeting, roofing tiles, façade systems, white goods, instruments and much more. The main consumer of pre-painted steel is the construction industry, which NLMK delivers over 95% of its pre-painted steel to. NLMK Group held a 24% share in the Russian market for pre-painted steel in 2016.

Source : Strategic Research Institute
voda
0
China mulling opening futures trading

Shanghai Daily reported that China is considering allowing foreign investors to trade domestic crude oil and iron ore futures as part of financial reforms, Mr Fang Xinghai vice chairman of the China Securities Regulatory Commission said that “The commission is working actively on a plan to expand the participation of foreign investors in China’s financial futures markets,” Fang told a derivatives forum, adding that the CSRC is studying tax policies for futures trading.”

Mr Fang said that “The commission is also considering crude oil and iron ore futures as a pilot to lure overseas investors.”

Shanghai is likely to launch crude oil futures this year, Mr Fang said last month. The move seeks to draw international buyers and lets the country maximize its global pricing power for the commodity.

Mr Fang added that the regulators are also studying new futures such as pulp, hog, jujube and apple, and will allow commercial banks to participate in the treasury futures market.

China is the largest consumer of several commodities, and has long sought to be a price maker globally.

Source : Shanghai Daily
voda
0
USTMA weighs in on steel imports investigation

Traction News reported that US Tire Manufacturers Association testified before a US Commerce Department hearing investigating the national security implications of steel imports. USTMA is requesting that specific types of tire cord quality steel wire rod, tire cord and bead wire be excluded from the Commerce Department investigation since domestic suppliers cannot meet volume and quality needs for this critical tire safety component.

Mr Tracey Norberg senior vice president and general counsel of USTMA said that “Tire manufacturing is vital to the US economy. Tires manufactured by USTMA members safely transport millions of Americans and millions of tons of goods each day throughout the United States. In addition, the US military depends on the tire manufacturing industry to supply tires to protect our national security.”

Virtually all of the steel wire rod used to manufacture high tensile tire cord and bead wire that is consumed in US tire manufacturing plants is sourced from foreign suppliers due to the stringent performance and quality requirements of tire manufacturing, as well as quality and supply limitations of domestic steel wire rod suppliers.

Mr Norberg said that “A disruption in tire manufacturing in the U.S. would harm the U.S. economy, since consistent tire supply is critical to the nation’s shipping and commerce needs, and threaten national security, since the U.S. military relies on the tire industry to provide high performing and durable tires to aid in our national defense.”

Domestic steel mills use a production process that is unable to produce tire cord-quality steel wire rod necessary to make tires for military and civilian applications by domestic tire producers.

Tire manufacturers use this steel wire in a tire’s steel belts, providing strength, high load-carrying capacity, puncture resistance and durability, and in the bead, which holds the tire to the rim.

Mr Norberg said that “Tariffs or quotas on these products would significantly disrupt the production of tires in the United States, due to quality and supply limitations in domestically producing tire cord-quality steel wire rod to replace imported products.”

Source : Traction News
voda
0
Essar Steel Algoma is now Algoma

After a decade known as Essar Steel Algoma, the historic steel manufacturer has launched its new brand: Algoma. During a ceremony at its facilities on the shores of the St. Marys River employees gathered to mark a new chapter in Algoma's history

Source : Soo Today
Bijlage:
voda
0
New NATO headquarters made with ArcelorMittal steel

ArcelorMittal Europe provided steel for the construction of the new NATO headquarters in Brussels. The new NATO headquarters includes offices, outdoor and indoor sports facilities, a logistics area, conference centre with a capacity of 2,251 seats, a restaurant for 600 people, a car park for 3,331 vehicles

In total, it will provide over 190,000 m² of available space on a 250,000 m² site for about 4,700 employees.

ArcelorMittal, through the centres in Orense (Galicia) and Getafe, both within Distribution Iberia, supplied hot rolled steel sections and merchant bars for the structure of this huge construction project. ArcelorMittal Construction was another contributor, supplying flooring system Cofraplus® 77 and roof cladding Hacierco® 54 S and 74 S.

The construction of the new NATO headquarters started in June 2012 and was completed in 2016. NATO will move to its new headquarters in 2017, 50 years after being transferred to Brussels.

Source : Strategic Research Institute
voda
0
NUM demands up to 16pct wage hike from Kumba Iron ore

Reuters reported that South Africa's National Union of Mineworkers has tabled wage hike demands of 12.5 to 16% with Anglo American's unit Kumba Iron Ore , well above inflation.

he wage demands call for a 16% increase for the lowest-paid category of workers or a monthly increase of just over R1 300. The highest-paid NUM members at Kumba are seeking a 12.5% raise or almost R2 600 a month.

Wage demands in recent years have been driven by sharply higher food prices triggered by a 2015-16 drought and inflation more widely.

But annual inflation slowed to 5.3% in April from 6.1% in March as food price rises slowed, Statistics Africa data showed on Wednesday, beating market expectations of a 5.55% year-on-year print.

Anglo American has signaled its intention to sell off its stake in Kumba and the talks could be tough as prospective investors will not want to be saddled with an onerous wage bill amid uncertainty about iron and steel prices.

Source : Reuters
voda
0
Vale new CEO eyes acquisition and diversification - Reports

Reuters quoted Mr Fabio Schvartsman new Chief Executive Officer of Vale SA as saying that the world's largest iron ore miner, intends to resume growth with acquisitions and diversification. Analyst reports from Bradesco BBI and Credit Suisse Securities issued on Friday said Mr Schvartsman means to avoid keeping "all eggs in one basket," referring to the firm's strong reliance on iron ore.

Analysts at Bradesco BBI said the company has yet to decide which operations to expand, pending further analysis. Its nickel business, for instance, does not yield high enough returns.

Mr Schvartsman, who took charge on Monday, set up working groups to measure the risks and returns of each of Vale's business units, according to the Credit Suisse report. A first assessment is expected in 60 days.

Source : Reuters
voda
0
Australian iron ore exports see modest growth in May – Westpac

FXStreet quoted Mr Rob Rennie Research Analyst at Westpac as saying that Australian iron ore exports for May so far are telling a story of continued modest growth as after an estimated 68.73 million tonne of iron ore exports in April (up 1.68%), May port activity suggests 70.99 million tonne.

Australian coal exports are continuing the recovery after the hit from cyclone Debbie. The current run rate for May is 31.5mt, up 9.9mt after being down 9mt in April due to flooding. However, even with that recovery, export volumes are still down close to -1.8%yy."

Source : FXStreet
voda
0
NMDC Q4 net profit up by 11.5%

Business Standard reported that public sector iron ore mining company NMDC has posted a 11.5% growth in its standalone net profit at INR 511.88 crore during the quarter ended, March 2017, compared with INR 459.08 crore in the corresponding quarter previous fiscal.

The company's total income from operations grew 87.6% to INR 2,871.60 crore in the quarter under review from INR 1,530.14 crore in the year ago period. Its overall expenses rose 67.2% to INR 1,970.51 crore during the quarter.

The company's consolidated net profit has come down marginally to INR 2,544 crore in 2016-17, from INR 2,546 crore a year ago. Its consolidated income rose 37% at INR 8,829.64 crore and expenses grew 38% to INR 5,432.22 crore in 2016-17 over the previous year.

Source : Business Standard
voda
0
Iranian major iron ore producer to boost granulated output

Financial Tribune quoted Mohammad Morshedzadeh company manager of Iranian Central Plateau Iron Ore Mines Complex as saying plans to produce 1.2 million tonnes of granulated iron ore by the end of the current fiscal year (March 2018).

According to the official, 700,000 tonnes of the total figure will be produced using ore extracted from Chah Gaz Mine, while Mishdavan Mine will supply the rest.

The company produced 744,300 tonnes of granulated iron ore in the last fiscal year (March 2016-17), according to statistics published by Iranian Mines and Mining Industries Development and Renovation Organization.

ICEP is a subsidiary of Iran Minerals Production and Supply Company and operates a host of Iranian iron ore mines.

Iran is home to 5.1 billion tonnes of estimated and 3 billion tonnes of proven iron ore reserves.

Source : Financial Tribune
Bijlage:
voda
0
Worst is over for steel sector - Mr Naveen Jindal of JSPL

The Hindu quoted Mr Naveen Jindal chairman of Jindal Steel & Power Limited as saying that he is now a relieved man after commissioning of India’s largest blast furnace in his Angul steel plant in Orissa. In an interview, Mr Jindal talked about the group’s future plans and turnaround of JSPL after completing the largest blast furnace on Saturday.

Here are the edited excerpts

Q - There is a concern about the huge debt of INR 46,000 crore on JSPL’s balance sheet?

A - We will reduce our debt by increasing our production. With the commissioning of the blast furnace, we will be able to almost double our production this year. Last year, we had produced 3.5 million tonnes of steel in India and 1.3 million tonne of steel in Oman, so a total 4.8 million tonnes. This year, we will produce 6 million tonne of steel here in Angul alone and 1.5 million tonne of steel in Oman, so the total comes to 7.5 million tonne. That would help us improve our EBITDA tremendously and we will be in a position not only to service our debt but also reduce it.

Q - There were plans of roping in a strategic investor at JSPL to reduce debt?

A - No. We are always looking for opportunities. If there is an investor who wants to come into the company, we will welcome that but on good terms. We are not desperate any more so we will welcome investors on our terms.

Q - Banks are not willing to lend to the steel sector?

A - If the money will not come, plant capacities will not go up, so it has to happen. I hope demand picks up in the country and if margins improve, the steel firms they will automatically want to expand because all the time our minds are working on how to increase the capacities. Everyone really enjoys doing that. Right now, I think we are doing it at a good pace and our focus is to run our existing capacities to the fullest.

Q - Last two years have been very bad for the steel sector. Do you think that the worst is over for JSPL?

A - I feel the worst is over for the steel sector. The prices are right and sustainable. We do have to improve on availability of raw materials and reduce the taxation. In India, we suffer due to excessive taxation and we pay the highest royalty in the world. On top of that there is district mineral fund, on coal there is this ?400 of clean energy cess, on electricity that we consume, there is electricity duty and high state taxes.

All these things make us uncompetitive, especially when we are competing in our global environment because international companies are not paying these kinds of royalties.

Source : The Hindu
Bijlage:
voda
0
Need to speed up capital formation for boosting steel consumption in India - Mr Sushim Banerjee

Mr Sushim Banerjee DG of INSDAG in his personal capacity wrote in Financial Express that it is now broadly accepted that the steel industry in India is having a positive roadmap laid out for it in the coming months. The just published fourth quarter results of the steel majors show a promising upward trend in the sales volume including exports, restrained costs of operation and growing EBITDA.

Global prices of iron ore at USD 56 per tonne CFR China, coking coal prices at USD 153 per tonne FOB Australia and scrap prices (HMS:80:20) at USD 260 per tonne tonne CFR East Asia point out to a further downward journey of these critical inputs for steel and would be a big relief to the bulk purchasers in restraining the operational costs of operation which is further benefited by the falling prices of fuel oil. To lend support to our rigorous export efforts, it is seen that industrial outlooks for EU and the US are robust and their demand for raw materials as well as cheaper finished products compared to that of their high cost producers is likely to rise. This apparently placid scenario may, however, change its course depending on what happens in China.

China has, as a part of its stimulus measures, announced a new Megacity of 12 million people at Xiongan (between Beijing and Tianjin port) which would require 15 million tonnes of steel per annum for the next decade. There is a broad unanimity on the proposed One Belt One Road (OBOR) project cutting across the countries. In the midst of all doomsday projected for Chinese steel industry in terms of capacity elimination, economic restructuring from investment-led to consumption-led, unmanageable debts and bad bank loans, the country has clocked a GDP growth of 6.9% in first quarter of the current year.

The gross fixed capital formation (GFCF) as a percentage of GDP stands at 43.2% in 2016. It is down by 1.7% compared to its level in 2015. It is projected to fall by another 1.3% in the current year as debt levels required to maintain rise in GFCF pose risks to its financial system and may become unsustainable. The total debt of the central and provincial government along with the householders stands at 256% of GDP by end of 2017. Accordingly the share of GFCF in GDP has been predicted to fall to 36.9% in 2020 and by another 5% in 2025. Correspondingly, the share of household consumption in GDP is likely to grow from 40.4% of GDP in 2016 by another 7.1% in next 3 years and by 4.9% in the next 5 years.

It is reported by WSD that while steel consumption per trillion dollars of fixed asset investment in China is 133 MT, in the US it is only 16 MT. Thus, steel intensive investment is the real answer to the phenomenal growth of steel industry in China.

However, the linkage of steel consumption with GDP is gradually waning. For instance, during 2002 to 2011, the FAI in China has been rising by 24.2%, while GDP (at current prices) grew by 16.7%. It was 20.3% growth in FAI in 2012 with GDP rising by 10.6%. In 2016, a 8.1% rise in FAI was accompanied by 6.7% in GDP.

The apparent steel consumption in China is projected to reach 738 MT in 2017 as against 707 MT in 2016 and then sliding down to 650 MT in 2020 and to 600 MT in 2025. While China has announced to close down inefficient and polluting industries (notably the induction furnace sector with around 80-100 MT of capacity) by 50% in 2017, the fresh construction and infrastructure projects would make supply demand matching exercise a reality with sustainable domestic prices.

It would also encourage Chinese exporters not to bring down the export offers and realise a near stability in the global market. The political stability, an important element in influencing the global market, is, however, uncertain and may be a strong dampener to the above scenario.

In India, steel intensity in real GDP (steel consumption per million rupees) was 7.97 tonnes in 2012 as against 25.9 tonnes in China and in 2016 the indicator was 6.87 tonnes in India as compared to 33.3 tonnes in China. GFCF in India must show a quantum jump from the current level of 29.2% of GDP in order to fulfil the targets set in NSP 2017.

Source : Financial Express
voda
0
Letter from 76 steel industry CEOs raises alarm about shape of Emissions Trading System reform

CEOs representing nearly the entire European steel industry today co-signed a letter addressed to the governments of all EU member states. The letter calls on political leaders to “help preserve a sustainable and globally competitive European steel industry. In Europe we must be able to produce the innovative steels that underpin modern society - and that help reduce CO2 emissions.”

Speaking after the signing of the joint letter Axel Eggert, Director General of the European Steel Association said “The European steel industry is one of the most innovative in the world. Our CO2 mitigation technologies are world beating. However, the EU has a large, open economy – meaning that if the post-2020 reform of the EU’s Emissions Trading System (EU ETS) creates costs for even Europe’s best performing steel plants, we will find ourselves uncompetitive in the fierce global marketplace for steel.”

The letter highlights the specific costs of the EU ETS reform as it exists today. While the European Parliament produced a version that would go some way to limiting the impact of the EU ETS on European steel’s competitiveness, the European Council text provides no such protections.

Quoting the letter, Mr Eggert said, “Were the EU ETS directive to be adopted without some of the improvements requested by the European Parliament there would be a shortage of emissions allowances for our industry of around 35% by 2030. In addition, the sector will be even more exposed to the carbon cost pass-through in electricity prices. Other industry sectors under the EU ETS do not face these constraints to the same degree.”

The European steel industry appreciates that climate protection is a critical issue and supports the necessary measures to bring greenhouse gas emissions under control. However, the industry – as evidenced by the wide support from the sector’s leadership – feels obliged to highlight that these CO2 emissions reduction efforts must be conducted cost-effectively and with a mature regard to EU steel’s global competitiveness.

“Steel produced abroad can be up to 50% more CO2 intensive than the same product produced in Europe. Getting the EU ETS post-2020 reform right is therefore both a matter of jobs, growth and competitiveness, but also of making sure we do not simply export our CO2 outside the EU”, concluded Mr Eggert.

Source : Strategic Research Institute
voda
0
Formosa steel plant in Vietnam starts trial of BF

VNA reported that the Taiwanese steel firm’s USD 11 billion Formosa steel plant in central Ha Tinh province of Vietnam started operating blast furnace on a trial basis on Monday.

Mr Hoang Duong Tung, deputy director of Vietnam's Environment Administration, said “If any incident occurs then we will stop operations immediately.”

It was still under construction when it was accused of illegally dumping waste into the ocean, causing masses of fish to wash up on beaches, including rare offshore species. It was behind a toxic waste dump that killed tonnes of fish in Vietnam last year. The incident was one of the worst environmental disasters in Vietnam, decimating livelihoods along the central coast and sparking angry protests that continue even today. The Taiwanese steel conglomerate was ordered to pay USD 500 million to the Vietnam government after the mass fish deaths in April 2016.

The Formosa plant was subject to a series of inspections, and the plant addressed 52 out of 53 violations identified before being given approval to operate. The remaining violation was related to a wet coking system, and officials said Formosa would switch to a cleaner dry coking system by 2019.

Source : VNA
Bijlage:
voda
0
Avdiivka Coke runs at full capacity for first time in three years

On May 24th, Avdiivka Coke Plant of Metinvest Group had its eighth coke oven battery in operation to produce the goods. This is the first time in three years that Avdiivka Coke is running at full capacity

Source : Strategic Research Institute
Bijlage:
35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 618 619 620 621 622 623 624 625 626 627 628 ... 1755 1756 1757 1758 1759 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Detail

Vertraagd 25 apr 2024 17:35
Koers 23,540
Verschil -0,100 (-0,42%)
Hoog 23,690
Laag 23,170
Volume 2.802.569
Volume gemiddeld 2.481.401
Volume gisteren 2.185.626

EU stocks, real time, by Cboe Europe Ltd.; Other, Euronext & US stocks by NYSE & Cboe BZX Exchange, 15 min. delayed
#/^ Index indications calculated real time, zie disclaimer, streaming powered by: Infront