Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 566 567 568 569 570 571 572 573 574 575 576 ... 1755 1756 1757 1758 1759 » | Laatste
voda
0
Feature Article

Major Chinese steelmakers expect stable 2017

Major steel mills in China are expecting stable financial results in 2017, based on information from 12 steelmakers so far this year. Many Chinese steelmakers have turned losses into profits in 2016, but most of them do not expect another significant improvement in 2017, Kallanish notes. 12 steelmakers in China have announced ...

van mijn Kallanish.com vrienden. :-)
voda
0
ArcelorMittal en Votorantim voegen Braziliaanse activiteiten samen

Geen financiele details.

(ABM FN-Dow Jones) ArcelorMittal en Votorantim hebben besloten om hun Braziliaanse staalactiviteiten samen te voegen. Dit maakte het in Amsterdam genoteerde ArcelorMittal donderdag bekend zonder financiële details bekend te maken.

De overeenkomst bestaat eruit dat Votorantim Siderurgia een dochter wordt van ArcelorMittal Brasil. Votorantim krijgt een minderheidsbelang in ArcelorMittal Brasil. De activiteiten van Votorantim in Colombia en Argentinië worden buiten de deal gehouden.

Op een groen Damrak noteerde het aandeel ArcelorMittal 2,0 procent hoger.

Door: ABM Financial News.

info@abmfn.nl

Redactie: +31(0)20 26 28 999

Copyright ABM Financial News. All rights reserved

(END) Dow Jones Newswires
voda
0
Glencore boekt weer winst

Concern brengt nettoschuld sterk terug.

(ABM FN-Dow Jones) Glencore heeft in 2016 het verlies van het jaar ervoor omgebogen in een nettowinst en heeft de nettoschuld sterk teruggebracht. Dit meldde het Zwitserse grondstoffen- en mijnbouwconcern donderdag in een rapportage met voorlopige cijfers.

Het aangepaste bedrijfsresultaat (EBITDA) steeg met 18 procent naar 10,27 miljard dollar en de aan aandeelhouders toe te wijzen nettowinst kwam uit op 1,38 miljard dollar, waar een jaar geleden nog een verlies werd geboekt van 4,97 miljard dollar.

De nettoschuld nam mede dankzij kostenbesparingen en desinvesteringen met 40 procent af tot 15,53 miljard dollar.

Het bedrijf zag het totaal aantal bezittingen met 3 procent afnemen naar 124,60 miljard dollar.

De omzet uit verkoop en industriële operaties bij metalen en mineralen steeg met 0,6 procent naar 66,34 miljard dollar. De omzet uit energieproducten nam 6,5 procent toe tot 89,02 miljard dollar. In de divisie landbouwproducten daalde de omzet met 5,1 procent naar 21,97 miljard dollar.

Op de beurs in Londen steeg het aandeel Glencore met 1,2 procent.

Door: ABM Financial News.

info@abmfn.nl

Redactie: +31(0)20 26 28 999

Copyright ABM Financial News. All rights reserved

(END) Dow Jones Newswires
voda
0
ArcelorMittal wins quality award from world’s largest automaker

Luxembourg, 23 February 2017 - ArcelorMittal has picked up a supplier award from the world’s largest automaker, in recognition of the company’s impressive quality performance.

Toyota Europe awarded the world’s leading steel and mining company its ‘Built-in Quality’ supplier award, with ArcelorMittal employees from the automotive Europe commercial team and the ArcelorMittal Atlantique and Lorraine team travelling to Toyota Motor Manufacturing’s plant in Burnaston near Derby, UK, in order to receive the award.

‘Built-in Quality’ is a Toyota methodology that aims to continuously improve quality. Toyota trains its suppliers to understand and implement this methodology in the sites that manufacture products for the automotive company.
ArcelorMittal’s ‘Built-in Quality’ award follows the implementation of the methodology, which began around 10 years ago, and comes in recognition of ArcelorMittal’s quality performance that has continuously improved over the last three years.

Toyota Europe gave a number of reasons for recognising ArcelorMittal with the award, including:

A low number of claims (for example, defects), exceeding Toyota Europe’s quality target by more than 15%

Recognition as the best steel supplier in Toyota Europe’s annual supplier assessment for the second consecutive year
The significant and increasing gap between ArcelorMittal’s performance and that of its competitors

Zero quality problem reports (QPRs) in 2016 for ArcelorMittal Mardyck in France (part of the Atlantique and Lorraine cluster), the main mill supplying Toyota Europe with automotive and exposed galvannealed steels
Recognition as the best quality steel supplier for Toyota Manufacturing Russia in 2016.

Commenting on the award, ArcelorMittal’s Francis Bugnard, general manager and technical general, Automotive Europe, said:
“This award is a recognition of the amazing efforts our teams made to meet Toyota Europe’s expectations, year after year, in terms of quality, making ArcelorMittal their most reliable steel supplier”.

From left to right: François Morneau - Toyota Key Account Manager, Valérie Carpentier - Toyota Deputy Key Account Manager, Emmanuel Deneuville - ArcelorMittal Mardyck Plant Manager, Annie Beaurain Cornuel - Built-in quality Project Manager, Jonathan Lobel - Asian OEMs Customer Technical Coordinator, Francis Bugnard - Technical General Director, Yazid Iguercha - ArcelorMittal Atlantique and Lorraine Customer Quality Manager, Jean-Alain Lucas - Toyota Customer Technical Support

ArcelorMittal has received a number of awards from its automotive customers in recent years. In June 2016, the company received a best supplier award from its automotive giant PSA Group, in the technical cost savings category. In 2015, PSA Group gave the company a supplier award in the value creation category.

In the USA, ArcelorMittal was recognized with a General Motors Supplier Diversity Award for the second consecutive year. ArcelorMittal received GM’s 2016 Top Diversity Performer Platinum Award at the Michigan Minority Procurement Conference in Detroit, having been recognized with a silver award in 2015.

In 2014, ArcelorMittal was named by Germany’s Kirchhoff Automotive as supplier of the year in the ‘raw materials’ category, one of just three suppliers awarded out of a list of 4000 companies. Kirchhoff Automotive recognised ArcelorMittal’s excellent performance in terms of quality, logistics and service as well as its strong support for resale projects and ramping up phases.

Toyota also awarded ArcelorMittal in 2011, when ArcelorMittal Herbault, part of the company’s Distribution Solutions business, was recognised for excellence in delivery.

ArcelorMittal is the only automotive steel producer with a worldwide presence, delivering a large scale of products, solutions and services to automotive customers with the same quality focus in all regions.

In Europe, ArcelorMittal’s automotive business shipped more than 7 million tonnes of steel to customers in 2015. The European arm of the business has steelmaking and processing facilities for the automotive sector in Belgium, France, Germany, Italy, Luxembourg, Poland, Romania, Spain and a joint venture in Turkey. It has Tailored Blanks sites in Belgium, France, Germany, Slovakia, Spain and the UK.

In addition, it has steel service centres (processing and logistics centres) and stamping partners across Europe.

Want to know more?

- View a map showing ArcelorMittal Europe’s industrial capacity for automotive steels
- Watch our new video about Jetgal®. This revolutionary new coating has been specifically developed by ArcelorMittal for cold rolled advanced high strength steel (AHSS) used in automotive applications such as Fortiform®.

corporate.arcelormittal.com/news-and-...
Back to news
voda
0
Iran private steel output up 45%

Financial Tribune reported that Iranian private steelmakers produced 3.42 million tonnes of crude steel during the 10 months to January 19, registering a 45% rise compared with last year’s corresponding period.

Iran Steel Producers Association’s latest data show that the private sector accounted for more than 22% of the industry’s total 15.4 million tonne crude steel output during the period. Private steel mills also produced 5.56 million tonnes of steel products, including beams, rebar and galvanized, hot and cold-rolled coils in 10 month period to record an 11% growth year-on-year. Their output comprised over 37% of Iran’s total 15-million-ton production of steel products.

Source : Financial Tribune
voda
0
Kinsteel loss cushioned by higher steel prices, productivity

The Sun Daily reported that Kinsteel Bhd saw a narrowed net loss of RM 8.26 million for the second quarter ended Dec 31, 2016 versus RM 16.82 million in the previous corresponding period, due to improved steel prices and higher productivity at its subsidiaries. Revenue was down by 0.6% from RM74.3 million to RM73.85 million.

The steel maker told Bursa Malaysia that its prospects will continue to be challenging and are highly dependent on the successful implementation of the proposed restructuring scheme with its financial lenders and major creditors.

The group is undertaking a debt restructuring exercise to address its liquidity issue.

Kinsteel said it needs to operate profitably in order to generate sufficient cash in the future to fulfil its obligations as and when they fall due, and financial support from the lenders and shareholders.

For the first half of the year, its net loss narrowed to RM 19.73 million from RM 35.32 million. Revenue fell 2.8% from RM 128.8 million to RM125.24 million.

Source : The Sun Daily
voda
0
Posco seeking new growth engine for next 50 years

Korea Herald reported that ahead of its 50th anniversary next year, Posco is seeking to make a second leap forward by securing a new growth engine and keeping its global reputation as the world’s fourth-largest steelmaker at the same time.

Despite an unfavorable market environment fueled by the growing fears over trade protectionism and oversupplies of steel products worldwide, the South Korean company posted an operating profit of 2.63 trillion won (USD 2.3 billion) last year, an 18 percent increase from the previous year. It was the first time in 11 years for the steel giant to post a two-digit percentage growth in profit, the company said, referring to its efforts in carrying out massive restructuring, cutting costs and focusing on sales of high value-added products.

This year, Posco plans to generate more profit by increasing the sale of high-strength and premium steel products exclusively developed and produced by the steelmaker.

The company plans to expand the global marketing of “giga steel,” referring to ultrahigh-tensile strength steel rated at more than 1 gigapascal.

The giga steel is lighter and strong enough to endure pressure of 100 kilograms per square millimeter and has been favored by global carmakers. Posco has produced 17 giga steel products for commercial use. The giga steel generates 5-20 percent higher operating profit than regular steel products, the company said. Last year, the South Korean steelmaker sold 9 million tons of automotive steel, accounting for about 10 percent of the market. It plans to expand the sale of automotive steel to 10 million tons after 2018.

Posco is building a smart factory in Gwangyang, South Jeolla Province, to test the feasibility of an automated production process from steelmaking to rolling. Using the Internet of Things, the planned smart factory offers comprehensive information on steelmaking and monitors the condition of equipment in real time for the safety of workers there and to prevent products with defects.

The steelmaker has also been accelerating its drive in the non-steel segment.

Earlier this month, Posco started producing lithium for commercial use for the first time in South Korea. The company has completed construction of a lithium extraction plant capable of producing 2,500 tons of lithium in Gwangyang.

The company plans to supply lithium carbonate to battery makers LG Chem and Samsung SDI, and to its affiliate Posco ESM, a local maker of anodes for rechargeable batteries. Korean battery makers have been relying on imported lithium so far. Posco supplying the material directly to battery makers will stabilize the supply chain, the company said, adding that it spent seven years developing the eco-friendly lithium extraction technology.

Source : Korea Herald
voda
0
AK Steel Announces Price Increase For Carbon Steel Products

AK Steel said that it will increase current spot market base prices for all carbon flat-rolled steel products by a minimum of USD 30 per ton, effective immediately with new orders.

Source : Strategic Research Institute
voda
0
Nucor Announces 176th Consecutive Cash Dividend

The board of directors of Nucor Corporation declared the regular quarterly cash dividend of USD 0.3775 per share on Nucor's common stock.

Source : Strategic Research Institute
voda
0
Investigation launched after two contractors rescued at British Steel

Scunthorpe Telegraph reported that a full investigation has started on the British Steel works in Scunthorpe into the rescue of two specialist contractors from a bunker as it was being filled up. The two rescued workers who have not yet been named were later taken to Hull Royal Infirmary.

A spokesman for Humberside Fire and Rescue said they were at the scene at 12.33pm. A total of six fire engines, three from Scunthorpe were sent, as well as a rescue unit. The spokesman said the contractors were rescued using rope dropped into the bunker from above.

A British Steel spokeswoman said: "We can confirm there has been an incident at our Scunthorpe site today, Wednesday 22 February 2017. Two workers from a specialist contractor company were clearing pulverised limestone from inside a bunker at our Sinter Plant and they became temporarily confined when material moved in the bunker. Emergency Services worked with our onsite emergency teams to assist both workers to safety. Both workers do not appear to have any major injuries but have been transferred to Hull Royal Infirmary to be checked as a precautionary measure. A full investigation has started."

Source : Scunthorpe Telegraph
voda
0
Iranian steel producers oppose plans to cut import tariffs

Fianancial Tribune reported that Iran Steel Producers Association has voiced its opposition to plans to reduce import tariffs on a number of steel products in an open letter to the First Vice President Es’haq Jahangiri last week. According to the association, the letter was written in reaction to the Minister of Industries, Mining and Trade Mohammad Reza Nematzadeh’s suggestion to Jahangiri back in December, Bourse Press reported.

Mr Nematzadeh called for reducing duties on less than 0.5 mm thick cold-rolled coils and less than 0.3 mm hot-rolled coils from 20% to 10%, and semi-finished non-alloy iron and steel products with less than 25% carbon (such as billets, blooms and slabs) from 15% to 5%.

Rebounding global steel prices, rising local demand and domestic producers’ inability to sustain an adequate supply have been cited as the reasons behind the industries minister’s proposal.

Iran Trade Promotion Organization’s Article One Commission, which comprises representatives of the ministries of industries, agriculture and economy, as well as those of the Central Bank of Iran and Iran Chamber of Commerce, Industries, Mines and Agriculture, has agreed to the minister’s proposal.

The government has yet to announce when the new rates will come into force.

Source : Fianancial Tribune
voda
0
Surging steel price boosts scrap value of redundant containerships

The Loadstar reported that a sharp increase in steel prices has prompted a new wave of vessel scrapping, bringing the supply-demand ratio in container shipping further into balance. According to the latest report from London shipbroker Braemar ACM, containership scrapping this year has already reached 56, amounting to 185,500 teu. This compares with 16 ships (45,000 teu) in the same period of 2016. Moreover, the delivery of newbuild tonnage has slowed considerably, with only 18 vessels, totalling 91,500 teu, having been delivered so far this year. Over 2016, there were 189 demolitions (658,000 teu), according to Braemar – a new record for the container industry.

The latest driving force is twofold: plenty of surplus tonnage, particularly in a panamax sector the industry would do well be get rid of, and steel prices have firmed significantly since the low point of 2016.

By 6 February, the idle containership fleet had swelled to 342 ships (1.32m teu), according to Alphaliner data, with liner voyages blanked and ad-hoc demand disappearing during the Chinese new year holiday.

This included 47 classic panamax vessels seeking employment in a charter market where daily hire rates have collapsed to only USD 4,250-USD 5,000 – below operating cost.

Of these vessels, Alphaliner notes, 30 are currently hot or cold lay-up, mainly at anchorages in South-east Asia, and their owners may now opt to cash in on an increased demand for steel scrap.

Braemar reports that the demolition market “remains firm” and had heard of one panamax vessel being negotiated at “excess USD 330/LDT basis as is Singapore”.

Steel commodity prices fell to an all-time low of USD 90 per tonne in March last year, before bouncing back in June to around USD 300 per tonne and remaining at that level for the rest of 2016.

Analysts are forecasting that steel prices could rise above USD 400 per tonne this year, and even higher in 2018, as demand begins to exceed supply.

This is a direct consequence of the world’s leading steel producer, China, reducing its production by around 20% by 2020, due to a depression in its construction activity linked to the nation’s economic slowdown.

Against this backdrop, the World Steel Association has predicted that demand globally will increase by 0.4% this year, including 5.9% growth in the US, thus resetting the supply-demand balance and pushing prices up.

Indeed, the increased price of steel has already had an impact on the container manufacturing industry, with market-leading lessor Textainer reporting last week that a steel price hike of some 80% in the past year was supporting new dry container prices of “above USD 2,000”.

The surge in steel prices is likely to also put an end to cheap ships if, and when, any new orders are negotiated, but the more immediate relevance is that with the scrapping option becoming more attractive to owners, the chronic over-tonnage that has blighted the charter market in the past few years could be over rather sooner than anticipated.

Source : TheLoadstar.co.uk
voda
0
Creditors of Saudi Al Ittefaq Steel Products agree to USD 1.7 billion debt deal

Arabian Business reported that creditors of Saudi Arabia's Al Ittefaq Steel Products, the country's largest private sector steel manufacturer, have provisionally agreed to a 6.2 billion riyals (USD 1.7 billion) debt restructuring, banking sources told Reuters on Tuesday.

They said that the terms of the deal have still not been finalised but banks have reached an agreement in principle to give the company a two year window in which it would only pay interest on its debt, two of the sources said. After that period a further restructuring would potentially happen. The company did not immediately respond to a request for comment.

Like many other companies in Saudi Arabia's construction industry, Al Ittefaq Steel has had to contend with a drop in global steel prices, an influx of cheap Chinese imports and a cut in government-funded infrastructure projects since oil prices sagged.

Chief executive Sharjeel Azhar, a former HSBC banker, told Reuters in an interview on November 30 that the company was hopeful of reaching a deal with banks on its debt restructuring, its second such process in the last seven years.

The restructuring proposal was sent to banks a few months ago, one of the sources said. Another of the sources said the company required a restructuring because of its limited cash flow.

In total, the company has 18 creditors which are mainly Saudi banks but which also include one or two international and regional lenders, Azhar said in November.

It has been in talks with a group which holds upwards of 60 percent of its total debt and which has been put in charge of negotiating a settlement, he said at the time.

The group consists of Saudi British Bank, Arab National Bank, Banque Saudi Fransi, National Commercial Bank, Riyad Bank and Samba Financial Group, Azhar said in November. Gulf International Bank and Alawwal Bank were also creditors, banking sources said.

Source : Arabian Business
voda
0
India conveys reason to WTO for MIP on steel: Steel Minister Chaudhary Birender Singh

Financial Express reported that India has conveyed to WTO the reason for imposition of minimum import price (MIP) on steel products and is ready to discuss the issue further if required. Japan has dragged India to the World Trade Organization against certain measures taken by New Delhi on imports of iron and steel products.

Steel Minister Chaudhary Birender Singh has said that “The rationale for imposition of MIP had also been communicated to WTO through our Indian Ambassador. So, if there is any further clarification required, Ministry is ready to discuss the same.”

India has moved from MIP to the regime of anti-dumping and safeguards, he said, adding that the MIP mechanism was an exigency measure that was taken to curb the unabated surge in imports at predatory pricing.

He said MIP was notified as an emergency measure as other trade remedial measures such as anti-dumping rules and safeguard rules are process oriented and time consuming in terms of implementation and impact.

He added that “However, MIP was gradually phased out as and when suitable trade remedial measures were put in place.”

The Government of India, he said, has provided extensive support to the domestic steel industry by way of various trade remedial measures in recent times, such as MIP, anti-dumping and safeguard measures and quality control.

Mr Singh said that “The current scenario in the steel sector is well known, and hence the government will take all necessary measures as and when required to support the industry.”

Source : Financial Express
Bijlage:
voda
0
UAE steel makers want more government intervention

Gulf News reported that with Chinese and Turkish made steel products still flooding the market, UAE manufacturers might still need additional layers of support from the government, say industry sources. In particular, the devaluation of the Turkish lira against the dollar, by as much as 22 per cent in the recent past, is giving local importers of Turkish steel competitive advantages that local producers find difficult to match, the sources add.

This is despite the removal of the 5 per cent duty waiver on such imports in 2015 that local traders used to enjoy.

Mr Bharat Bhatia CEO of Conares, which operates two steel plants in Dubai. “But the lira’s weakness has set aside the impact from the 5 per cent duty imposition. Until 2015, traders could ship at zero import duties provided they did some value-addition. But the norm was that very little value-adds actually took place and the traders would just dump them into the local market at whatever price was available.”

He said “But the local industry needs further protection — all local steel makers have requested the Ministry of Economy to consider imposing a “safeguard duty” of 10-15 per cent on top of the 5 per cent import rate. We have provided all the details related to how cheap Turkish imports are affecting local producers. We have said this before every country with sizeable domestic steel production have in place protection of one sort or the other, including the US and India. There is a lot of supply coming from even the other Gulf states into the UAE — that’s not something UAE producers are concerned about. If the UAE impose tougher duties on non-GCC imports, it could even prompt other GCC states to do the same. For domestic economies, it’s the best way forward.”

UAE’s Ministry of Economy has been putting in its best efforts to ensure a level playing field for domestic producers. Last year, it issued directives to the construction industry to give preferences “Made in UAE” steel in their projects. And if they did not do so, issue justifications as to why they sourced from elsewhere. There could be further regulatory measures — a draft anti-dumping duty that could conceivably cover a range of commodities is awaiting the final sign-off, Bhatia said.

Source : Gulf News
voda
1
China eyes tougher air pollution controls in Beijing – Report

A senior environmental official said that China will impose tougher controls on air pollution in Beijing and nearby regions this year to combat heavy smog, closing illegal plants and slashing steel production. To reduce winter pollution, Beijing, Tianjin and 26 cities in the surrounding provinces of Hebei, Shanxi, Shandong and Henan must attain their annual goals of cutting steel overcapacity ahead of schedule, Zhao Yingmin, vice minister of environmental protection, said at a press briefing.

Those cities should shut down all illegal polluting factories by the end of October and ensure a decrease in their total amount of coal consumption this year, Zhao said.

During the winter heating season, major steel producing cities in Hebei, which is adjacent to Beijing, must cap their output at half of their capacity, he noted.

Meanwhile, cement and casting industries in the Beijing-Tianjin-Hebei region will continue to halt production in winter.

The production controls play a significant role in offsetting pollution in winter, as coal burning for heating usually leads to about a 30-percent increase in pollutant discharge, according to Zhao.

He also demanded clean fuel be used for winter heating and urged stronger measures to curb car emissions.

In 2016, the density of PM2.5, fine particulate matter that causes smog, in the Beijing-Tianjin-Hebei region dropped by over 30 percent from 2013, Zhao said.

However, he noted that the region continued to see frequent heavy pollution in winter and there remained difficulties in tackling the problem.

The share of days with good air quality in the Beijing-Tianjin-Hebei region was merely 36.2 percent in January, a year-on-year drop of 19.6 percentage points, data from the Ministry of Environmental Protection show.

PM2.5 density in Beijing surged 70.6 percent to 116 micrograms per cubic meter during the month, according to the data.

Source : CRI
Bijlage:
voda
0
FIFO boosts the bush - Rio

Bloomberg reported that Rio Tinto is becoming more reliant on FIFO workers from regional WA as its shaves a workforce that is pumping hundreds of millions of dollars into the country economy.

As a further fight broke out between the Liberals and Nationals over Brendon Grylls’ proposed mining tax, a report commissioned by the mining giant and compiled by ACIL Allen showed that the end of the mining boom was hitting regional economies as jobs supported by fly-in, fly-out workers disappeared.

Rio has, since 2012, kept tabs on the economic footprint of its Pilbara FIFO workforce, which last year amounted to 6755 people. Of that group, more than 2000 were based in regional parts of WA.

They injected $305 million in wages into local communities, particularly in the South West and Peel.

Mandurah is home to the biggest number of regionally based Rio FIFO workers with 326, followed by Busselton (206), Bunbury (206), Geraldton (179) and Albany (98). Indigenous Australians are also strongly represented in Rio’s regional FIFO workforce.

Of its 533 indigenous employees, almost half live in regional parts of WA, with many of those from the Kimberley and Mid-West.

Rio Tinto iron ore chief executive Chris Salisbury said it was clear the company’s regional FIFO workforce was making a significant financial contribution to towns and communities across WA.

But he warned they would be at risk from the Nationals’ proposed mining tax.

Mr Salisbury said that “We employ almost 12,000 people across Western Australia”

An ill-conceived tax will place these local jobs and the growth of Rio Tinto’s iron ore business at risk.”

There is open warfare between the WA Liberals and the Nationals, with regional Liberals warning Brendon Grylls’ FIFO plan would smash towns such as Busselton.

Liberal member for the southern seat of Vasse Libby Mettam said Mr Grylls’ plan to offer tax incentives to mining companies to encourage workers to live in mining towns threatened thousands of jobs across the State.

She said Busselton had one of the biggest FIFO populations in WA. Ms Mettam added that “Regional WA can ill-afford to support the Nationals’ Live Where You Work policy, which only benefits the Pilbara, by moving families away from communities like Busselton. We need to support FIFO, and keep people in regional towns and making our communities sustainable.”

Source : Bloomberg
voda
0
Iron ore production in Odisha has touched a peak of 85 mt

Business Standard reported that iron ore production in Odisha has touched a peak of 85 million tonne, the state's highest in a decade and it has improved its own production rate of 80 mt in previous financial year. Going by the current production tempo, the state's iron ore output can breach 100 mt, setting a new benchmark.

Despatch of iron ore from the mines has also increased considerably by reaching to 89 mt. It points out the reviving demand from steel and other end-use industries.

A state government official said that "The extension of lease validity and increased level of mechanisation at some key operating mines had led to the spike in production. We are confident that Odisha's iron ore production will be over 100 mt by the end of this financial year.”

Odisha is the largest iron ore producing state and its ore production went up nearly 50 per cent in 2015-16 from 47 mt to 80.86 mt. This came on the back of the state government's swift orders to extend the validity of mining leases after the enactment of the amended Mines and Minerals- Development & Regulation (MMDR) Act.

Pan-India iron ore production moved up 20 per cent in the previous year, it rises from 129 mt to 155 mt. Market estimates have put this fiscal's iron ore production in the country to be in excess of 180 mt.

Taking advantage of the rebound in global iron ore prices, Odisha was also keen to export its surplus iron ore. Benchmark prices of 62 per cent Fe grade iron ore fines have touched a multi-year high of USD 92.34 per tonne, the highest level since April 2014 buoyed by the strength in Chinese steel prices.

Despite the startling recovery in international global iron ore prices, miners from Odisha have not been able to cash in on the advantage. Iron ore exports till the first week of February from Odisha, have totalled to a measly four mt despite the state's potential to export a lot more.

Source : Business Standard
Bijlage:
[verwijderd]
0
AB, Voda,

Het begint volatiel te worden, net te vroeg turbos aangeschaft, maar goed, voor je het weet staat ie weer hoger.

Success,

Ozzy
voda
0
BHP CEO says sees some risk to downside for iron ore prices

Reuters reported that BHP Billiton said it sees a little downside risk for iron ore prices as Chinese demand moderates. The market was likely to come under pressure in the short term from moderating Chinese steel demand growth, BHP Chief Executive Andrew Mackenzie told reporters after reporting a sharp rise in first-half profits on the back of stronger mineral commodities prices.

Source : Reuters
35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 566 567 568 569 570 571 572 573 574 575 576 ... 1755 1756 1757 1758 1759 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Detail

Vertraagd 26 apr 2024 17:37
Koers 23,750
Verschil +0,210 (+0,89%)
Hoog 24,080
Laag 23,700
Volume 2.295.626
Volume gemiddeld 2.493.843
Volume gisteren 2.802.569

EU stocks, real time, by Cboe Europe Ltd.; Other, Euronext & US stocks by NYSE & Cboe BZX Exchange, 15 min. delayed
#/^ Index indications calculated real time, zie disclaimer, streaming powered by: Infront